1-800-320-7140

Mon-Fri 9am-8pm

Sunday 11am-7pm EST

Wheelchairs

Scooters

Walkers

Accessories

Incontinence

Bathroom

Lift Chairs

Beds/Tables

Kids

All Products

Manual Wheelchairs

Ridgid Ultralight Weight

Invacare Top End Crossfire Titanium Wheelchair

Invacare Top End Crossfire Titanium Wheelchair

Invacare Top End Crossfire Titanium Wheelchair
Item #: 4189 | InvacareSKU: CRFT

Print Page

Email a Friend

Write a Review | Read Reviews

Quick Overview

Very few nuts and bolts for minimum maintenance and repairs

$2,029.00
Sugg. Retail: $3,114.00

Shipping: FREE /
Leaves Warehouse In: 3-5 Days

Description

The Top End Crossfire Titanium is the ultra-lightweight, high-performance rigid custom manual wheelchair you’ve been looking for. The chair’s open frame construction give it a cool, minimalist look. And thanks to no underframe, the chair is a breeze to get into or out of a car. There are very few nuts and bolts to loosen or go out of adjustment, which translates to optimum performance and less maintenance and repairs. The "just where you need" them adjustments are easy and fast.

The ergonomic seat option provides a built-in “sweet spot” that promotes a neutral pelvic position for good posture, as well as better pressure distribution for those with impaired trunk control.

The Crossfire Titanium is a super value. Each wheelchair comes standard with adjustable tension upholstery, high performance wheels and high-pressure tires.

Features

Open frame construction
No underframe for easy, compact transport
Very few nuts and bolts
Optimum performance with minimal maintenance and repairs
Ergonomic seat option provides a built-in “sweet spot”
Adjustable tension upholstery
High performance wheels
High-pressure tires

Included

Top End Crossfire Titanium Ultra Lightweight Wheelchair
Free Shipping
Limited Lifetime Warranty on Frame
One Year Warranty on Parts and Upholstery

Specifications

Weight Capacity	250 lbs.
Weight	18.5 lbs.

Front Frame	Tapered (standard) , V-Style (optional)
Front Frame Angle	70° , 75° , 80° , 85° , 90°

Front Seat Height	16" - 21" (fixed)
Rear Seat Height	14" - 21" (fixed)

Armrests	Swingaway
Seat width	12" - 20"
Seat Depth	14" - 20"

Back Style	Folding (standard) , fixed (optional)
Back Height	8" - 11" , 10" - 14" , 12" - 16" , 14" - 18" , 16" - 20"
Back Angle	Folding: -15° , -10° , -5° , 0° , 5° / Fixed: 0° , 3° , 6° , 9°
Back and Seat Upholstery	Adjustable tension by straps

Axle Position / Center of Gravity	Adjustable to 4.25" in two positions: Amputee position: -2.25" - 2" / Active position: 1.25" - 5.5"
Rear Wheel Axle	Quick release (standard) , quad-release or titanium (optional)
Rear Wheel Camber Tube	0° , 3° , 6° , 9°
Rear Wheel Size	22" , 24" , 25" , 26"

Handrims	Aluminum anodized , titanium , coated , natural fit
Wheel Locks	Push to lock or scissor lock
Front Forks	Non-suspension or suspension

Caster Size	3" , 4" , 5"
Caster Type	Semi-pneumatic , soft roll or lighted

Medicare HCPCS Code	K0009

Warranty	Limited lifetime warranty on frame. One year warranty on parts and upholstery

Model Choice

Seat Width

It's important for the wheelchair to be fitted properly and be as narrow as possible while maintaining comfort and safety. This will insure the best performance for navigating tight areas both inside the home as well out in public spaces.

A wheelchair that is too narrow or too wide can cause discomfort. When too narrow, a wheelchair can become restrictive and increase the likelihood of pressure sores, while when it's too wide, becomes more difficult to push due to the angle of the arms from the shoulders to the wheels.

To determine the necessary seat width, measure the rider's widest area of the body and add one inch. This will allow for optimum seat width while maintaining ideal usability, comfort and safety.

Seat Depth

Front Seat Height

Front seat height is measured from the front of the seat to the floor. Standard seat to floor height is 19.5". Hemi height (a lower seat) is usually 17.5"

To determine the appropriate seat height, measure from the bend of the knee to the bottom of the foot. Subtract the height of the seat cushion if one is being used. If the wheelchair is not being self propelled by the feet, also add about 2 inches to allow for foot clearance.

Front Frame

Rear Seat Height

Rear seat height is measured from the back of the seat to the floor. A chair's rear seat-to-floor height is most commonly set at a height 1" lower than the front seat height

The rear of the seat is generally set at lower height than the front of the seat to prevent sliding forward.

Back Type

Front Angle

Seat Options

Back Upholstery

Color

Back Height

Arm Rests

Push Handles

Footplates

Axles

Options

Rear Wheel Type

Casters

Easy to overlook, casters are critical to the performance of a wheelchair.

Casters are the small front wheels of the wheelchair. They allow the wheelchair to steer and turn in any direction by rotating on its vertical axle.

Casters typically come in sizes from 3" to 8". The smaller the caster the better the maneuverability of the chair and the less likely it is to shimmy. But smaller casters on unpaved surfaces, riding in and out of elevators, or passing over street grates can be more problematic. Smaller casters are typical of chairs used for sports like basketball, which is played on an even, hard surface, yet their maneuverability makes them popular for everyday use. 3" casters require the most riding skill and may not be the best choice for a first time wheelchair user.

The large 8", pneumatic (air-filled) caster provides the softest ride and easily rolls over bumps and raised surface, yet makes propelling the chair more difficult. Because of their size, 8" casters can be an obstruction coming into contact with furniture or the rider's foot. Pneumatic tires need to be kept inflated with the correct pressure, and are capable of going flat.

4" to 6" casters offer a good combination of maneuverability, performance and ease of riding over surface obstructions. Composite (airless) casters offer better durability and quicker ride, while pneumatic casters provide a softer, slower experience.

Rear Tires

Camber Angle

Camber Angle is the off-vertical tilt of the rear wheels. It is adjusted to control maneuverability, speed and stability.

The greater the camber angle, the further the distance between the bottom of the rear wheels and the closer the distance between the top of the wheels. Increasing the camber angle provides the rider with increased maneuverability and stability, but also increases the overall width of the wheelchair.

Typically 0-3 degrees of camber is considered standard for everyday use to accommodate narrow doorways and aisles. A higher camber angle is useful for sporting activities such as basketball where added stability and maneuverability is desired.

Handrims

Wheel Locks

Wheel locks also known as brakes are used to keep the wheelchair in a stationary position, for example while traveling on public transportation and for safe transfers in and out of the chair. Using wheel locks as a braking device can cause injury and excessive tire wear and should never be used in this manner.

There are various types of wheel locks available:

1. Push-to-lock wheel locks are the most common. The break is engaged by the rider pushing forward and applying pressure with the palm of their hand until the lever snaps into position.

2. Pull-to-lock wheel locks work in the same manner as the push-to-pock except the lever is pulled forward. For some riders, it may be easier because it does not require as much upper body mobility needed to push the lever away from the body.

3. Swing-away, low-mount and under-mount wheel locks work in different ways depending on the style. These wheel locks help you avoid hitting your thumbs when pushing directly on the tires by mounting the wheel locks away from this range of motion. Due to its location, some riders with limited mobility may not be able to engage these wheel locks.

Wheel lock extensions provide a greater lever arm to apply and remove the locking mechanism, making the wheel locks easier to engage for a rider with decreased upper strength.

Center of Gravity

Measure from the front of back post at the seat tube to the center of the rear axle

Side Guards

Anodizing Accents: Forks and Back Angle Bracket

Handrim Mount

Seat Upholstery

Accessories

Wheelchair Ponchos

Winter Poncho

This fully-lined polar fleece unisex water-repellent winter poncho is ideal for the hard-to-dress set. It slips over the head in one easy motion. Made to overcome the nastiest types of weather. Perfect for wheelchair users on the go. One size fits all.

Wheelchair Rain Poncho

Our hooded pochos provide complete protection against the rainiest days. We make them from only the most durable 65/35 polycotton poplins, and they are 100% water repellent. One size fits all.

Top End Crossfire Titanium Ultra Lightweight Wheelchair

12"

13"

14"

15"

16"

17"

18" (Standard Adult)

19"

20"

14"

15"

16" (Standard Adult)

17"

18"

19"

20"

16"

16.5"

17"

17.5"

18"

18.5"

19"

19.5"

20"

20.5"

21"

Non-tapered "V" front end

Tapered seat width (-1" taper difference rear to front of seat)

Tapered seat width tapers rear to front up to a maximum difference of4". The front seat width measures the same as the outside of the footrest or straight so there is no tapered or V frnot end. Foot space widths is 2.25" less than front frame width. Not available with Ergo seat or widths of 12" or 13".

Tapered seat width (-2" taper difference rear to front of seat)

Tapered seat width (-3" taper difference rear to front of seat)

Tapered seat width (-4" taper difference rear to front of seat)

Tapered front end (standard)

14"

14.5"

15"

15.5"

16"

16.5"

17"

17.5"

18"

18.5"

19"

19.5"

20"

20.5"

21"

Lock-down, folding height/angle adjustable back - standard

Folding or fixed back available. Folding back is manufactured of 1" aluminum tubing and is only available with adjustable height (3/4" tube telescoping in 1" tube)

Fixed back w/ fixed angle welded at 0°

Maximum height on fixed back is 16". Fixed back is manufactured in 1" titanium and is available in fixed or adjustable height (7/8" telescoping in 1" tube). Welded integral push handles only available with fixed back height.

Fixed back w/ fixed angle welded at 3°

Fixed back w/ fixed angle welded at 6°

Fixed back w/ fixed angle welded at 9°

70°

75°

80°

85°

90°

Ergo seat w/ tapered front end

14" is the lowest rear seat height for tires or 24" wheels with knobby tires, 16" for 25" wheels with knobby tires or 26" wheels with standard tires. Ergo seat should be a minimum of 2" difference between front and rear seat heights.

Ergo seat w/ V style front end

Ballistic nylon

Breathable mesh

Adjustable tension upholstery w/ straps and anchors

Fold over back upholstery

Adjustable tension upholstery w/ anchors

Wet black

Black prism

White snow

Silver metallic

Silver vein

Copper penny

Electric blue

Midnight blue

Cosmic blue

Grasshopper green

Emerald green

Electric teal

Tangerine red

Grape madness

Electric red

Safety yellow

Sunkissed orange

Fruit fusion

Fixed w/out push handles - 10"

Fixed w/out push handles - 11"

Fixed w/out push handles - 12"

Fixed w/out push handles - 13"

Fixed w/out push handles - 14"

Fixed w/out push handles - 15"

Fixed w/out push handles - 16"

8" - 11"

10" - 14"

12" - 16"

14" - 18"

16" - 20"

Fixed w/out push handles - 8"

Fixed w/out push handles - 9"

Swingaway arms

Adjustable in 1" increments from 10.5" - 12.5" (top of seat rail to armrest)

Push handles adjustable height bolt-on

Push handles non-adjustable bolt-on

Bolt-through integral push handles

Welded integral push handles

1 Piece tubular footrest

One piece tubular footrest does not have a cover.

Adjustable angle one piece footplate

Adjustable angle one piece footplate is standard for frames with V style front end.

Adjustable angle footrest with 2" risers

Quad release axles

Titanium axles

Fold-in style black aluminum side guards

Fold-in style carbon fiber side guards

Fold-in style flip back side guards for easier transfers and height adjustablility.

Removable side guards / fender

Removable side guards - 6"

Removable side guards- 7.5"

22" Spoke

22" Spinergy spox wheels

24" Spinergy spox wheels

24" Spinergy LX wheels (12 spoke)

25" Spinergy spox wheels

25" Spinergy LX wheels (12 spoke)

3" Micro

3" Aluminum soft roll

4" Semi-pneumatic

5" Semi-pneumatic

4" Aluminum soft roll

Aluminum casters are 1.4" wide with soft roll tires.

5" Aluminum soft roll

Aluminum casters are 1.4" wide with soft roll tires.

4" Lighted front wheels

Primo high pressure tires (grey)

Pneumatic - 1.38 treaded (grey)

Schwalbe 1" black flat resistant

Knobby tires (grey)

Solid no flat tires (grey)

Solid no flat tires (black)

0° Camber tube with single camber - standard

3° Camber tube with single camber

6° Camber tube with single camber

9° Camber tube with single camber

Aluminum anodized handrims

Titanium handrims

Coated handrims

Natural Fit LT standard grip handrims

Natural Fit LT super grip handrims

Natural Fit standard grip handrims

Natural fit super grip handrims

Pull to lock

Push to lock

Hideaway undermount wheel locks

Not available on 14" depth

Hill holders

Omit wheel locks

Active position (1.25" - 5.5")

Measured from the back of the post to the center of the axle.

Extended position (2.25" - 2.0")

Measured from the back of the post to the center of the axle.

Fixed aluminum side guards flush w/ wheels

Fixed aluminum side guards 1" above wheels

Fixed carbon fiber side guards flush w/ wheels

Fixed carbon fiber side guards 1" above wheels

Bold black

Classic silver