Close

EZRide+ Lightweight Electric Mobility Device

  • 91792
  • EZRide+
  • EZRide+

Availability: Leaves Warehouse in 1-2 days

Customize & Buy

Customize & Buy

Please select another option
Please select another option
Please select another option
Total:
$1,099.00
-
+
As low as /mo
Check my rate
Back

Details

Description

EZ Ride + is the latest innovation in mobility! It gives you the freedom to move about with confidence and power. This lightweight, strong, and convenient device takes any average wheelchair to the next level. Moves over rough terrain with ease. The brake handle position on EZRide+ is easily customizable, for your comfort and confidence, using the included multi-tool. Here we show how the brake handle can be adjusted for owners who have a weak or comprised grip without reducing safety.

The EZRide+ fits most foldable wheelchairs from 14″ – 22″. Using the Butterfly Clip accessory, the EZRide fits Tilite aeroZ, Tilite ZRA, Invacare Crossfire, Quickie GT, Kushall AirPro wheelchair, and many more.

EZRide+ can travel approximately 12-15 miles on a single charge. This estimate is dependent on factors such as traveling speed, weight, terrain, and incline. The EZRide+ uses an 8 inch wheel with an in-hub brushless 36V 350W electric motor.

It takes approximately 4 hours from 0% battery to fully charged. We recommend charging the EZRide+ after each use or when the battery reaches 30%. The EZRide+ battery is a lithium-ion 36V 350 Wh 10.0 Ah battery.

For those with limited grip strength, the handbrake can be adjusted on the handlebars to enable pressing with a cupped or open hand to stop. All controls can be moved to either side of the handlebars.

The EZRide+ can handle any asphalt or concrete surfaces, as well as average length grass, or hard-packed dirt or gravel. EZRide+ is NOT designed for operation in the sand or at the beach.

The EZRide+ is water-resistant, but cannot be submerged in water. We do not recommend leaving the EZRide+ outside in the rain for long periods of time. However, light rain will not damage the EZRide+. Many parts of the EZRide+ are stainless steel or coated aluminum so they will not rust. However, we recommend wiping it down with a dry cloth if it gets wet.

Note: EZRide fits all standard wheelchairs between 14" – 22" wide, and accommodates riders up to 300 lbs. (in addition to the weight of the wheelchair or or EZRide+).

Features

  • The headlight is completely adjustable
  • Built in Cruise Control
  • Multi-tool Included
  • Folds and stores easily
  • Rechargeable battery
  • EZ to attach and detach to any chair 14"-22"
  • Not airline approved
  • Not for use with transport wheelchairs
  • Wheelchair NOT included
  • DO NOT use EZ Ride on an incline of more than 30 degrees

Specifications

Manuals & Warranties

Product Specifications

Weight Capacity300 lbs.
Product Weight30 lbs.
Overall Height 36"
Product Height36"
Driving Range15 miles
Maximum Speed12mph
Turn Radius360 degrees
Handle Bar Width24.5"
Battery TypeLithium-ion 36V 350 Wh 10.0 Ah
Battery Charging Time4 hours
MotorIn-hub brushless 36V 350W electric motor
Wheel Size8"
Tire MaterialSolid State Tire

Returns

Return Policy

Please inspect your product upon delivery. If your item was delivered without a signature and is damaged or incorrect please call 1800wheelchair Customer Service at 1-800-320-7140.

If EZ RIDE+ is not right for you, you may return it with the following conditions:

  • Item must be returned within 30 days from the date it was delivered, with a 15% restocking fee
  • The unit must be returned in new condition, in original boxes, and with all paperwork, parts, and accessories
  • Once your RMA is received back to our warehouse, refunds may take 7-10 Days to fully process. Any damages while in your possession will be deducted from your refund, unless otherwise noted.
  • Your EZ Ride must be put back in its original packaging. Units not shipped back in the original packaging will not be accepted.
  • Return shipping costs are the responsibility of the customer.
  • Shipping & Handling is NON-REFUNDABLE
  • Replacement parts accessories may NOT be returned.
  • Any products received at our warehouse WITHOUT prior Return Merchandise Authorization (RMA) approval, will be charged a PENALTY of $500 in ADDITION to the 15% Restocking fee and delivery charges.

Manuals & Warranties

Reviews

Free Charger Bag

Butterfly Tow Bar Clips

Stainless steel EZRide+ Butterfly Tow Bar Clips. These clips are designed for wheelchair tubing up to 36mm (1.4in.). Use the Butterfly Tow Bar Clips for wheelchair models: Tilite aeroZ, Tilite ZRA, Invacare Crossfire, Quickie GT, Kushall AirPro, and Strongback models 24, 24AB, 22s, and 22sAB.

If the wheelchair tubing is larger than 36mm, then the butterfly clips will not work. The Allen screws can be removed and replaced with larger M8 screws (not included) greater than 50mm (2in.) in length. This will allow the clips to work on wheelchair tubes larger than 36mm.

Handle Bar Extension

The EZRide adjustable handle bar neck is constructed of aluminum and increases the reach of the handle bars. 4.375in extension with 180 degrees of adjustability.

Tow Bar Extension

The EZRide Tow Bar Extension is constructed from 2mm thick stainless steel square tubing and be configured for a 3in. or 6in. extension.

Strut

The EZRide struts are 1"/25mm diameter tubes, 6" long, intended to be mounted on frame members for when the tow bar is too wide, even when fully collapsed. Pin stop ensures the tow bar clamps will not slide off.

Can be mounted on wheel chair frames up to a diameter of 38mm/1.5" Set of Two.

Grab Handle

The EZRide Grab Handle is made with heavy duty nylon mesh with wide velcro closure. It is a sturdy rubber handle that makes it easier to load, unload, and store EZRide. The velcro closure allows easy removal when not in use.

This grab handle is highly recommended to any person that is over 65 or limited in strength