Industrial Hand-Held UV-C Disinfection Light

The Larson Electronics hand-held UV-C Light is a powerful sanitation solution for industrial sites and commercial facilities. Equipped with a UVC fluorescent lamp, this system offers 2.4 watts of output, within the 200nm - 280nm UV-C range (253.7 nm). The lights have an expected lifespan of 8,000+ hours and emit a flood beam pattern. This UV system operates on 120V or 220V and offers 180 degrees of coverage. With a recommended 20-25 minute exposure time for viruses, multiple devices can be purchased to cover larger areas quicker. The UV light can disinfect over 99% of bacteria, viruses, mold, and spores. best uses are for spaces up to 300sf such as Dr' offices, ambulances, offices and home use

The ballast is contained within the handle, while the housing is constructed of non-sparking aluminum with molded bumper guards, an annealed glass tube shield and integral lamp shock absorbers.

Disclaimer: Be sure to use gloves and eye protection when dealing with this product as direct prolonged exposure to UV light is proven to cause harm.

WARNING: It is very important that only qualified personnel perform maintenance and repair operations. The integrity of the component assembly and flame-path must be maintained in order to provide adequate protection for personnel using this light.
Comply with all NEC Rules and Regulations when performing maintenance operations. Failure to comply with these could result in an explosion, electrical shock, or personal injury.

WARNING: When performing maintenance operations disconnect power. Failure to do so could result in electrical shock. Make a thorough visual inspection of the work light for any chips, cracks, or burns within the glass, aluminum handle. Check the entire length of the cord for any frays or visible wires that could affect the performance of the light. Check that all the rubber bumpers are integral with the aluminum. If there are any frays in the cord, cracks in the glass or disturbances in the aluminum outside of normal wear, remove the light from service immediately.
This unit can be cleaned applying Simple Green® or an equivalent cleanser and wiping any dust or grease off with a rag. After the cleaning process is performed, allow adequate time for light to completely dry before placing it in operation.