Home
Availability: 4 to 6 weeks Lead Time
This will insure the best performance for navigating tight areas both inside the home as well out in public spaces.
A wheelchair that is too narrow or too wide can cause discomfort. When too narrow, a wheelchair can become restrictive and increase the likelihood of pressure sores, while when it's too wide, becomes more difficult to push due to the angle of the arms from the shoulders to the wheels.
To determine the necessary seat width, measure the rider's widest area of the body and add one inch. This will allow for optimum seat width while maintaining ideal usability, comfort and safety.
To determine the appropriate seat depth, measure from the back of a chair to the inside of your knee. Subtract one inch to assure no contact is made between the edge of the wheelchair seat and the inside of your leg, which could cause discomfort and prevent the rider from sitting back fully in the chair.
Make sure you'll be positioned correctly in your wheelchair and can sit at your desk or kitchen table. Standard tables/counters have a knee clearance of 27 inches.
When armrests are not fitted properly the wheelchair can become more difficult to push. Not all armrests are adjustable. Height should be fitted to allow the forearm to rest fully on the armrest without pushing up on the shoulders. For users who sit at a table or desk, swing-away armrest can beneficial.
There are four basic types of armrests:
1. Full length, fixed height (entire armrest is padded with a non-adjustable height)
2. Full length, adjustable height (entire armrest is padded with various height seetings)
3. Desk length, fixed height (partial armrest is padded for easier access with tables, non-adjustable height)
4. Desk length, adjustable height (partial armrest is padded for easier access with tables, various height seetings)
Armrest that can be easily removed or flip up and down gives users the choice of when to use the armrests.
2. Elevating Leg Rests are used when better circulation is needed or there is limited mobility in the leg. They raise the foot, straightening the leg. A calf pad is usually included.
3. Fixed Riggings are attached to the wheelchair frame and are not collapsible or removable, but the height of the footplate can be adjusted to the proper fitting.
For optimum comfort and safety, leg rests should provide a proper foundation for the legs and feet. The bottom thigh area should be fully supported by the seat while the soles of the feet are supported by the foot rests. Discomfort, stress and poor posture can be caused when the legs and feet are left hanging without the support they need or when the foot rests are too high. Poorly fitted leg rests can have a destablizing effect on the chair, making it more difficult to push and navigate due to improper weight distribution. Removable and fixed footrests are available at different angles depending on the users needs. A lesser angle allows the feet to extend further in front of the wheelchair for people who do not bend well at the knees. It also allows the heels of the feet to avoid the wheels when using larger diameter casters. A higher angle will bring the feet closer to your body and the wheelchair, shortening the overall wheelbase, allowing the wheelchair to turn in tighter spaces.
There are two types of rear wheels, Spoked Wheels and "molded" Mag Wheels.
1. Spoked Wheels are made of metal and are similar in appearance to that of bicycle wheels. The number and size of the spokes affect durability, shock absorption, weight, and performance. The more spokes, the more stable the wheel will be.
2. Mag Wheels are made of molded plastic or a composite. They have a small number of wide molded spokes that are an integral part of the wheel. Mag wheels are more durable, require less maintenance, and usually weigh more then spoked wheels.
Casters typically come in sizes from 3"" to 8"". The smaller the caster the better the maneuverability of the chair and the less likely it is to shimmy. But smaller casters on unpaved surfaces, riding in and out of elevators, or passing over street grates can be more problematic. Smaller casters are typical of chairs used for sports like basketball, which is played on an even, hard surface, yet their maneuverability makes them popular for everyday use. 3"" casters require the most riding skill and may not be the best choice for a first time wheelchair user.
The large 8", pneumatic (air-filled) caster provides the softest ride and easily rolls over bumps and raised surface, yet makes propelling the chair more difficult. Because of their size, 8"" casters can be an obstruction coming into contact with furniture or the rider's foot. Pneumatic tires need to be kept inflated with the correct pressure, and are capable of going flat.
4" to 6" casters offer a good combination of maneuverability, performance and ease of riding over surface obstructions. Composite (airless) casters offer better durability and quicker ride, while pneumatic casters provide a softer, slower experience.
The Invacare IVC 9000 XDT Manual Wheelchair is designed for individuals who demand an extra wide, heavy-duty or tall wheelchair with seat-to-floor heights ranging from hemi through tall. The high-performance 9000 XDT provides a 350 lb. weight capacity and components that are interchangeable with the other 9000 series wheelchairs.
Weight Capacity | 350 lbs. |
Product Weight | 36.5 lbs. |
Seat Width | 18" - 22" |
Seat Depth | 16" - 20" |
Seat-to-Floor Height | 17.5" - 21.5" |
Overall Width | 23" - 29" |
Overall Length | 45.5" |
Overall Height | 36" |
Folded Width | 13" |
Front Wheel Size | 8" |
Rear Wheel Size | 24" |
Axle Type | Fixed |
Armrest | Full Length - Removable |
Back Height | 15" - 19" |
Upholstery Type | Nylon |
Upholstery Color | Black |
Footrests | Swingaway, Elevating |
HCPCS | K0007 |
Shipping Weight | 46.5 lbs. |
Box Length | 34" |
Box Width | 13" |
Box Height | 39" |
Weight | 37 lbs. |
Back Height (adjustable back) | 15″ - 19″ |
Back Height (straight back) | 14″ - 18″ |
Overall Width | 26.5″, 28.5″, 30.5″ |
Arm Style | Removable, full-length, desk-length, fixed height (10″), adjustable height (10″ - 14″) |
Front Riggings | Swingaway or elevating legrests |
Upholstery | Nylon |
Medicare HCPCS Code | K0007 |
Warranty | Limited lifetime warranty |
Unfortunately, we can not accept returns on this product. Items damaged during delivery or sent incorrectly will be fixed or replaced at 1800wheelchair.com’s expense.
See our full return policy here.
With the Armrest Pocket you no longer need to bend over or extend your arms to reach important items.
This pocket easily attaches to the arm of your wheelchair and offers that extra bit of storage space that is always so helpful. You'll now have a convenient and accessible place to keep your wallet, keys, cell phone and personal items when you are on the go.
Dimension: 11" x 3" x 3"
Small dimensions and lots of storage make the 1800wheelchair Tote Bag a perfect compliment to your walker.
Five pockets make this bag incredibility useful; three pockets offer encloses and two are open. You'll find a spot for your mobile phone, water bottle, magazine and still have room to spare. To increase on-coming visibility, we added reflective trim edging.
This tote is super easy to install. It utilizes Velcro straps, the tote securely attaches to a walker frame.
The 1800Wheelchair large wheelchair bag offers functional styling, ample storage and quick access to all your stuff.
Setup is easy: simply slide the top bag straps over back push handles and tighten. We've included some quick-release plastic clips for easy-on, easy off action. This large bag can attach to most wheelchairs and scooters. We've also included a handle on top for easy toting while not attached.
The bag offers two pockets. The larger, rear pocket includes a Velcro top to keep your belongings secure and protected. The second compartment, made of heavy duty mesh material, is open top for quick access — perfect for magazines or water bottles.
This innovative beverage holder is designed to attach almost anywhere. As the name implies, it will carry a variety of beverages for the thirsty consumer. It is the first and only gimbaled and adjustable beverage holder. Just pull and twist the bottom of the cup holder and it will increase in length and at the same time automatically adjust its inner diameter. Don't worry about "spillage", the gimbaled action will always keep a beverage upright. Neoprene, inside the holder insulates any beverage to keep it at its proper temperature.
The Liquid Caddy will attach virtually anywhere, wheelchairs, scooters, walkers, power chairs; it is the most versatile beverage holder on the market It comes with 4 attachments and with velcro mounts extension (included) you can attach the Liquid Caddy on up to a 4” diameter bar.
ThIs Drive Bariatric Auto Seat Belt is Black and for use with all Drive and other leading manufacturers wheelchairs. It can accommodate waist sizes up to 60".
To attach this seat belt, you'll need a screwdriver.
First, you'll remove two of the screws (one each side) holding down the seat upholstery.
Next, you'll place the eyelet on the seat belt above the hole, where the screw was just sitting.
Finally, place the upholstery back where it was and reattach with a screwdriver.
Watch the video to learn how to attach a seat belt to a wheelchair
Turn any armchair or wheelchair into one big pillow! Complete, one piece, luxury polyfill pillow covering, for seat bottom, back, sides, and over armrests. Fabricated of Navy poly/cotton broadcloth shell with a 3" thick, breathable, hypo-allergenic poly fiberfill core.
This ideal cushion, reduces body pressure, stimulates circulation, reduces numbness, soreness and discomfort as well as reduces heat build-up by increasing air circulation and soft and Resilient polyfill is built to last.
The overall size of the cushion is 48"x42", the seat area is 16" width, however, please be aware that the side arms are pillowy, there could be a significant difference in size when it is put.
Machine Washable. MADE IN USA.
NYOrtho Gel-Foam Cushions combine a dual chambered gel insert within a dual density foam body. This combination helps prevent pressure injuries, improve patient comfort and correct patient positioning.
The dual density foam layers provide a medium top entry layer, promoting proper envelopment, and a higher density base layer for continuous support and pressure distribution. A dual chambered gel-pod reduces gel migration and dissipates metabolic heat, continuously maintaining a cool interface between the body and cushion.
It also features a high-performance stretch cover that improves moisture evaporation with an aggressive non-slip bottom keeping the cushion firmly in place.
Designed to provide comfort and basic protection for the wheelchair bound patient. Made of medium density fire-retardant foam and available in either a poly/cotton or incontinent medical grade vinyl cover. Ideal for institutional use.
Care instructions: