Close

Quickie 2 Foldable Ultra Lightweight Wheelchair

  • 34860
  • EIQ2X
  • Sunrise Medical

Leaves Warehouse In: 6-8 weeks

Customize & Buy

Customize & Buy

Please select another option
Learn More

The Quickie Xtender is Quickie's latest in a continuing line of power-chair innovations.

By providing a power assist to a manual chair, users can now maintain the look, control and functionality of a manual chair, without the extra effort involved in unassisted manual propulsion.

The Quickie Xtender will xtend the distance you travel, xtend the efficiency of your push and xtend your transportation options. The Quickie Xtender is available in two versions. The first version increases the force applied to the handrims by a factor of 1.5. The second version increases the force applied by a factor of 3.

This added assistance can decrease the users energy expenditure by as much as 45%.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Learn More

Rear frames are typically available in three styles:
1. Curved or Rounded rear frames offer great maneuverability and quick-response performance, while providing a sport appearance and the shortest overall length.

2. Square or Straight rear frames perform with outstanding stability. The axle plate allows the rear wheels to be placed directly below the back canes.

3. Extended rear frames allow adjustment for the position needs of both adolescents and individuals with special seating requirements.

Also some chairs have ""Heavy Duty"" options that allow for a reinforced frame and upholstery with increased weight capacity

Less
Please select another option
Please select another option
Please select another option
Please select another option
Learn More
Front seat height is measured from the front of the seat to the floor.
Standard seat to floor height is 19.5". Hemi height (a lower seat) is usually 17.5

 

To determine the appropriate seat height, measure from the bend of the knee to the bottom of the foot. Subtract the height of the seat cushion if one is being used. If the wheelchair is not being self propelled by the feet, also add about 2 inches to allow for foot clearance.

Less
Please select another option
Learn More

Rear seat height is measured from the back of the seat to the floor.

A chair's rear seat-to-floor height is most commonly set at a height 1" lower than the front seat height.

The rear of the seat is generally set at lower height than the front of the seat to prevent sliding forward.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Learn More
To determine a chair's back height, measure from the seat upholstery (at the seat rail) to the top of the back upholstery.Less
Please select another option
Learn More
The Quickie 2 backrest is adjustable, here you choose the preconfigured height setting.
This can be changed with a wrench on your own as well.

To determine a chair's back height, measure from the seat upholstery at the seat rail to the top of the back upholstery.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Learn More
An axle plate is a bolt-on, adjustable plate that receives the rear wheels and allows for vertical and horizontal adjustment of the chair's center-of-gravity.
The farther forward you move a rear wheel the easier it is to push, but this will change the center of gravity making the chair easier to tip backwards. In addition to the standard option, axle plates can also come as:
  • Offset Axle Plate: This style combines the standard rectangle and curved shapes. Other than this stylistic difference, this option functions just like the standard axle plate.
  • Amputee axle: This offsets the axle behind the backrest for enhanced rearward stability. This changed center of gravity corrects any imbalance resulting from the amputee’s lack of forward body weight. Note that with this option the overall length of the chair is extended.
  • Curved Axle: Unlike the rectangle axle plate, the curved axle plate is curved. This allows the chair to be configured to more seat-to-floor heights. In most cases, the customer will just specify their required seat-to-floor height. The manufacture, while building your chair on the factory floor, will appropriately choose between the curved and standard axle plates in order to accommodate your preferred seat-to-floor height.
Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Learn More

Wheel locks, also known as brakes are used to keep the wheelchair in a stationary position, for example, while traveling on public transportation and for safe transfers in and out of the chair.

Using wheel locks as a braking device can cause injury and excessive tire wear and should never be used in this manner.

There are various types of wheel locks available:

1. Push-to-lock wheel locks are the most common. The break is engaged by the rider pushing forward and applying pressure with the palm of their hand until the lever snaps into position.

2. Pull-to-lock wheel locks work in the same manner as the push-to-pock except the lever is pulled forward. For some riders, it may be easier because it does not require as much upper body mobility needed to push the lever away from the body.

3. Swing-away, low-mount and under-mount wheel locks work in different ways depending on the style. These wheel locks help you avoid hitting your thumbs when pushing directly on the tires by mounting the wheel locks away from this range of motion. Due to its location, some riders with limited mobility may not be able to engage these wheel locks.

Wheel lock extensions provide a greater lever arm to apply and remove the locking mechanism, making the wheel locks easier to engage for a rider with decreased upper strength.

Less
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option
Please select another option

Accessories

Total:
$1,476.00
-
+
As low as /mo
Check my rate
Back

Details

Quick Overview

  • The best selling Ultralight Wheelchair in the world for over 25 years
  • More features and options than any other folding wheelchair

Description

The Quickie 2 from Sunrise Medical has more features and options than any other folding chair in today's market. There are over 64,000 configurations to customize your chair to your individual needs. It's versatility and well-established track record has made the Quickie 2 the premier choice of manual folding ultralight wheelchairs for over 25 years.

Picture shows chair with cushioned back and laterals.

Features

  • Multi-adjustable caster forks allow for the most possible seat-to-floor height choices (from 13" - 22")
  • New swing in and swing out detachable footrests for easier transfer accomidation
  • Q-Fit Technology for the most quiet and stable armrest and side guard recievers
  • Quickie's Tru-Fit Program provides one-time free parts offer to modify the size of the chair within five years of ownership
  • Armrest options allow optimal user support, positioning and transfer needs
  • Aluminum Frame
  • 5.5" to 20.5" Lower Leg Length
  • Angle Adjustable Backrest (-15° to +3° )
  • 0°, 2°, 4° Camber
  • 1" to 3.5" Center of Gravity (COG) Adjustment
  • Free Shipping

Specifications

Product Specifications

Weight Capacity300 lbs.
Product Weight25.4 lbs.
Weight Without Wheels13.6 lbs.
Seat Width12" - 24"
Seat Depth12" - 22"
Seat-to-Floor Height13" - 22"
Overall Width 20" - 29"
Folded Width13"
Frame ColorBlack - Yellow
Front Wheel Size 3" - 8"
Rear Wheel Size20" - 26"
Axle TypeQuick Release
Armrest Full Length, Desk Length
Back Height9" - 21"
Upholstery TypeNylon
Upholstery ColorBlack
FootrestsSwingaway, Elevating
HCPCSK0005
Warranty on Frame Lifetime Limited
Warranty on Wearable PartsOne Year Limited
Shipping Weight50 lbs.
Box Length33"
Box Width13"
Box Height38"

Returns

Return Policy

Returns Policy

Unfortunately, we can not accept returns on this product. Items damaged during delivery or sent incorrectly will be fixed or replaced at 1800wheelchair.com’s expense.

See our full return policy here.

Reviews

Frame Color

Frame Type

Front Seat Height

Caster Wheels

Caster Forks

Caster Pin Locks

Not available with Xtender Power Assist Option or Frog Legs.

Rear Wheel Type

Rear Wheel Tires

Handrim Options

Quick-Release Axle Type

Spoke Guards

Armrest Style

Side Guards

Wheel Locks

Hanger Style (Front Riggings)

Footplates

1.5" Auto Buckle Belt with Clamps

2" Aircraft Buckle with Clamps

2" Aircraft Buckle, Padded with Clamps

Caddy

Not available with Front Mount Hangers.

Crutch Holder

Gel Cover Hanger with Frame

Grade Aid / Hill Holders

Not available with polyurethane, Kik, Schwalbe or high pressure clincher tires. Also not available with Short Frame, Ergo Scissor or Compact Wheel Locks.

IV Holder

Neoprene Impact Guards

Seat Pouch Black /Charcoal

Tool Kit

Wheelchair Rain Poncho

Wheelchair Rain Poncho

Color

M2 Active Cushion with 3D Quadra Gel (Zero Elevation)

M2 Active Cushion with 3D Quadra Gel (Zero Elevation)

Liquid Caddy Drink Holder

Liquid Caddy Drink Holder